Pumping the water from the condenser as fast since it is formed would keep the vacuum. Heat may also come from different kinds of energy. It is not matter that can be measured by weight or volume. It is a form of energy which can exist on its own and can be moved from one place to another. Latent heat is a shortage of rise or fall of temperature in a reversal of state (saturation).
The higher pressures needed to operate a number of the newer refrigerant gases at useful temperatures is a big portion of the reason it’s difficult to retrofit many old cooling appliances with a new refrigerant gas. This temperature is obligatory for deciding the condenser leaving temperature difference. The refrigerant temperature has to be higher so heat can flow in the condensing medium. The condensing temperature is going to be kept slightly higher than the ambient temperature to permit for the heat transfer to happen. Even though the temperature is changing, the pressure will stay the same. The temperature at this time can be gotten from a pressure-temperature chart.
Liquid must be given to the TXV not a combination of liquid and gas. Just because a liquid is in its boiling point doesn’t signify it’s actively boiling. It can not be compressed and if a compressor tries to compress a liquid something is going to break and it’s not going to be the liquid. To put it differently, all the liquid must be vaporized for superheating to occur. Subcooled liquid is currently formed.