Why Almost Everything You’ve Learned About Compressor Discharge Line Is Wrong and What You Should Know

compressor discharge line

Some heat pumps are made to heat water rather than air. Valves may also have a poor seat where the valves sit in the valve pockets. It’s a vapor pump, so there has to be vapor in its inlet along with vapor in its outlet. The ideal way to decide if your compressor is operating during its usual efficiency is to do a pump up test. Quite simply, the condenser has to be maintained at a temperature that’s well over the temperature of the surrounding medium. After the refrigerant is a blend of liquid and vapor, the refrigerant is reported to be saturated. Either way, condensate is normally discharged employing an automated drain.

What You Need to Know About Compressor Discharge Line

Constant pressure is the most common. Oil temperature does have an effect on power, but it’s due to viscosity. A high condensing temperature is just one of them. To sum up, inlet air temperature has a modest effect on compressor efficiency, based on the scenario. The purpose of wanting to know the comp discharge he or she is to prevent chances of detonation that can happen due to excessive heat. This discharge temperature shouldn’t ever exceed 225F. Because the compressor’s discharge temperature is superheated, a pressure-temperature relationship doesn’t exist and it has to be read right on the discharge line by some kind of temperature-measuring device.

You get whatever you need in 1 unit. In the event the system isn’t employing a pressure tank, the reply is yes. Unless the actual system controls allow a minumum of one compressor in the system to react efficiently to the greater flow that the decrease intake temperature provides, there will not be any energy savings.